Whirlpool 3MAS4132FW0 Use And Care Manual Download Page 16 | Manualshive

Page: 16 / 16

Whirlpool 3MAS4132FW0 Use And Care Manual Download Page 16

16

R

EQUESTING

A

SSISTANCE OR

S

ERVICE

I

F YOU NEED ASSISTANCE OR SERVICE

…

If your problem is not due to any of the items listed
in the “Troubleshooting” section, contact the dealer
from whom you purchased the washer, or
Whirlpool South Africa (Pty) Ltd. Consumer Care
Toll Free Line 0800128940 for assistance.

When calling, please know the purchase date, and
the complete model of your appliance (see “A Note
to You”). This information will help us better
respond to your request.

I

F YOU NEED REPLACEMENT PARTS

…

FSP* is a protected trademark of Whirlpool
South Africa (Pty) Ltd. for quality parts. Look
for this symbol of quality whenever you need a
replacement part for your WHIRLPOOL appliance.
FSP replacement parts will fit right and work right,
because they are made to the same exacting
specifications used to build every new
WHIRLPOOL appliance.

To locate replacement parts in your area, contact
the dealer from whom you purchased the washer,
or an authorized Whirlpool South Africa (Pty) Ltd.
service company.

*

Registered Ttrademark of Whirlpool, U.S.A.

3951064A

10/98

Printed in U.S.A.

© 1998 Whirlpool Corporation

«
...
14
15
16

Summary of Contents for 3MAS4132FW0

















Reviews:

No comments