Whirlpool 2440 Parts & Service Manual Download Page 20 | Manualshive

Page: 20 / 20

Whirlpool 2440 Parts & Service Manual Download Page 20

Whirlpool of India

This document is only intended for qualified technicians who are aware of the respective safety regulations.
First release Date 2

nd

May, 2001

Subject to modification Revision No1

Document No. WOI/WM/2001/001 Reviced on 13/01/2003

PAGE 19 of 21

COMPONENT CHECK GUIDE

Cont’d

6

Spin Motor

Does not run

Check the winding resistance
using a multimeter between wires
BLACK & BROWN 69 Ohms
approx. BLACK & WHITE 77.5
Ohms. If the resistances are not
as per the given value it could be
short or open

Replace the Spin
motor

7

Wash / Spin
motor

Noisy Operation
Wash / Spin

Visually check the damages on
pulley and refer, also check for
free rotation of the rotor. If any
damages noticed or the rotor not
rotating freely indicates defective
motor (Wash & Spin).

Replace the
Wash / Spin
motor.

Electric current
leakage

Check the motors for short
between body and terminals
using a multimeter. If meter
shows continuity, it indicates
motor is defective.

Replace the
motor.

8

Lid Switch

No spin

Adjust / Replace the lid switch
and check for the continuity using
a multimeter. If no continuity
indicates lid switch defective.

Make contact
between the two
leads to the lid
switch assy.

12

Drive assy

Noisy agitation

Visually check for excessive play
in the shaft. If anything as above
noticed indicates defective drive
assy.

Replace the drive
assy

«
...
18
19
20

Summary of Contents for 2440





















Reviews:

No comments