U
SER
M
ANUAL
M
ODEL
M
Page 28
Figure 20. Mode switch placement for slow speed setting
●
Push the directional controller very slowly in the direction you wish to move the
Model M. You will feel the directional controller engaged when the device starts to
move. Keep the speed switch at the slowest speed.
●
Move to a safe open space and at the slowest speed with the controller, check that
you can move in any direction you want.
●
If you feel there are any new noises or vibrations, make note of these and report
them to WHILL customer support.
INFORMATION
If the logo light is flashing (and the wheelchair is not in a low battery condition), this is
an indication that the seat is not in the fully retracted position. You will have to move
the seat backwards before driving the chair.
It is recommended that you leave the device in “S” mode when not driving the chair.
Driving Conditions
The Model M is designed with four wheel drive and should provide traction and stability
in many conditions. However it is important to be aware of the limitations of the Model
M. Note that if operating the Model M in low temperature conditions the battery capacity
may be reduced and you may not be able to drive as far as in normal conditions. Other
limitations are highlighted in
Figure 21
and the warnings below.
U
SER
M
ANUAL
M
ODEL
M
Page 33
•
Before releasing the electromagnetic brakes, use stopping devices such as chucks
or stops to prevent the Model M from rolling away.
•
Never park or transport a Model M that has a brake released.
How to release the electromagnetic brakes
To release the electromagnetic brakes, use the following steps:
•
The electromagnetic brake levers are located at the front of the chair, below
the seat (Figure 23).
•
Release each brake by pushing the lever down (see white arrow with unlock
symbol) (Figure 24)
Figure 23. Placement of brake release levers on Model M
N026935.01F
320-00630-DHF.DO-01 User Manual Model M US rev 12internal print-paginated-side.pdf
Aug 15 2017 16:01:21
