Page 10
Remote Input 1 or 2:
Select the command or function by using the COMMAND GROUP keys and the
arrows. Press
PRECHECK
when the desired function appears on the display. Use
the numeric keypad to select the Address and press
PRECHECK
to enter. Press
PRECHECK
to save.
To set the Remote Input equal to a Call Key, press Call Key
C1
at the command
prompt. Then enter the appropriate Call Key number through the numeric keypad.
Press
PRECHECK
to enter. Press
PRECHECK
to save.
Tmx Warm Up
Use the numeric keypad to select a value (0.0-9.9). The decimal point is fixed.
Press
PRECHECK
to enter. Press
RESET
to return to the Stand By display or an
UP
or
DOWN
arrow to scroll to a different parameter.
Area Code:
Use the numeric keypad to select a value (000-999). Enter three digits. Press
PRECHECK
to enter. Press
RESET
to return to the Stand By display or an
UP
or
DOWN
arrow to scroll to a different parameter.
Base I.D.:
Use the numeric keypad to select a value (0-7). Press
PRECHECK
to enter.
Press
RESET
to return to the Stand By display or an
UP
or
DOWN
arrow to scroll
to a different parameter.
Precheck Digit:
Use the numeric keypad to select a value (0-9). Press
PRECHECK
to enter.
Press
RESET
to return to the Stand By display or an
UP
or
DOWN
arrow to scroll
to a different parameter.
Precheck Duration:
Use the numeric keypad to select a value (0-9). Press
PRECHECK
to enter.
Press
RESET
to return to the Stand By isplay or an
UP
or
DOWN
arrow to scroll
to a different parameter.
Channel Grant Wait:
Use the numeric keypad to select a value (1-9). Press
PRECHECK
to enter.
Press
RESET
to return to the Stand By Display or Scroll to a different parameter.
Channel Grant Delay:
Use the numeric keypad to select a value (.0-.9). Press
PRECHECK
to enter.
Press
RESET
to return to the Stand By Display or an
UP
or
DOWN
arrow to scroll
to a different parameter.
Reset Programming:
Press
PRECHECK
to reset all of the programmable parameters.
Programming Examples
Before beginning any programming it is important to write down what will be programmed. Be sure to make
note that a minimum of a 2 second delay time is required.
Example:
Key#
Sequence#
Command
Address
Delay
1
00
Wail
####
030
1
01
Cancel
####
002
