manualshive.com logo in svg

Wheelock ZC-312, Installation Instructions Manual

Share
Download
Wheelock ZC-312 Installation Instructions Manual Download Page 5

Additionally, the ZC-312 can be programmed for use with a Wheelock TPI-100 Interface which produces paging from a Station Level, or Centrex line, as 
shown in Chart 7. 

 
 
 
 

CHART 7 

TPI-100 INTERFACE FOR STATION LEVEL, CO, OR CENTREX PAGING SYSTEM PROGRAMMABLE FUNCTION 

 
 

FUNCTION 

CHOICES FOR SYSTEM 

Station level, CO or 
Centrex line paging 

"LO" with Wheelock TPI-100 Interface. 

(Wheelock TPI-100 
Interface is required). 

"HI" without Wheelock TPI-100 Interface. 

 
Depending upon system amplifier configuration, the amplifier functions and background music mute operation will vary, as shown in Chart 8. 
 
 
 
 

CHART 8 

AMPLIFIER CONFIGURATIONS, FUNCTIONS, AND MUSIC MUTE OPERATION 

 

 

AMPLIFIER CONFIGURATION 

FUNCTION 

MUSIC MUTE OPERATION 

(A)  One (1) Central Amplifier 

Paging & Music 

Paging any zone will mute music in 
all zones. 

(B)  Two (2) Central Amplifiers 

One for Paging 

and 

One for Music 

Music is muted only in the paged 
zone(s). 

(C)  Zone Amplifiers,  
      Line Preamplifiers 
      Speaker Amplifiers 

 

Paging & Music 

Music is muted only in the paged 
zone(s) 

(D)  Mixed 
      (A) & (C) Above 

 
 

Paging & Music 

1.  Central Amplifier Zones: 
     Paging mutes music in all  
     zones. 
2.  Zone Amplifier Zones: 
    Music is muted only in  
    the paged zone(s). 

(E)  Mixed 
     (B) & (C) Above 

Paging & Music 

Music is muted only in the paged  
zone(s). 

NOTES 

1.  The talkback function is centrally controlled in the ZC-312, and can be selected per Zone for 
     Configurations (A) and (B), as well as the (A) and (B) segments of mixed systems (D) and (E). 
2.  Mixed amplifier configurations (D) and (E) cannot be applied within the same zone group. 
3.  When 2 central amplifiers are used, music will be muted in All Zones only when a Talkback Zone is  
     accessed. 

 
 
 
 
 
 
 
 
 
 

P81982 K 

Sheet 5 of 21 

The following application diagrams show the seven basic system configurations of the ZC-312 and its companion ZEM-3 Zone Expansion Modules.  All 
of these configurations are possible with the appropriate programming switch selections.  Figures 2, 3, 4, and 5 are typical configurations using central 
amplifiers.  Figure 6 is a typical configuration using amplified speakers.  Figures 7 and 8 are typical configurations using zone amplifiers. 
 
 

Summary of Contents for ZC-312






















Reviews:

No comments

Brands by name

Popular brands

Load more brands