NOTE:
FOR MOST PAGING AND BACKGROUND MUSIC SYSTEM APPLICATIONS, IT IS
NOT NECESSARY TO ACCESS THESE SWITCHES.
WARNING:
TO AVOID THE RISK OF ELECTRIC SHOCK, BE SURE THAT THE AMPLIFIERS AC
LINE CORD IS DISCONNECTED FROM THE AC POWER SOURCE BEFORE
REMOVING THE COVER.
Remove the 8 screws (4 on either side) holding the cover to the chassis.
When viewed from the top front of the amplifier, the switches are located on a 4 segment switch block, in the lower left
hand section of the power PC Board which is mounted to the chassis base.
ALC (LIMITER) AND MUTE ON-OFF SWITCHES
FIGURE 11.
P82423 C
Sheet 9 of 10
ALC (LIMITER) ON-OFF SWITCH:
For live program applications, (i.e., house of worship, auditoriums, etc.), it is often desirable to defeat the ALC (limiter)
function. This results in more "natural" (wider dynamic range) sound reproduction. Move switch #4 to the right (OFF)
position. (Set at factory in the ON position.)
