P83270 B
Sheet 3 of 5
Figure 3.
1. The key must be inserted and turned to the ON position for the controls to function. The key is removable only in the OFF
position.
2. The status LEDs reflect the system’s condition regardless of the key position. The green LED indicates there are no faults in the
SAFEPATH system. The amber LED indicates there are 1 or more faults in the system (see SAFEPATH manual for
troubleshooting procedures). The red LED indicates the SAFEPATH unit is in an alarm condition.
3. Switching the AUTO/MANUAL switch to the MANUAL position initiates a tone alarm.
4. Pressing the microphone press-to-talk button initiates a live audible announcement.
5. Each alarm has its own priority. The actions of the Remote Microphone might override or be overridden by other actions. See
Table 1 for a list of all alarm conditions.
Table 1: Alarm Conditions and the Respective Resulting Actions (in order of priority)
1. Panel mic push-to-talk button is depressed.
a. Panel live voice broadcast enabled
b. Strobes enabled
2. AUTO/MANUAL switch in manual position.
a. Selected tone broadcasts
b. Strobes enabled
3. Optional remote mic key is on and remote mic
push-to-talk button depressed.
a. Remote mic live voice broadcast enabled
b. Strobes enabled
4. Optional remote mic key is on.
a. Selected tone broadcasts
b. Strobes enabled
5. Channel play contacts close.
a. Selected tone broadcasts
b. Strobes enabled
c. If DV option is attached, then:
1) Recorded message plays (see Note below)
2) Strobes enabled
See SAFEPATH Manual for additional information.
ANY MATERIAL EXTRAPOLATED FROM THIS DOCUMENT OR FROM WHEELOCK MANUALS OR OTHER
DOCUMENTS DESCRIBING THE PRODUCT FOR USE IN PROMOTIONAL OR ADVERTISING CLAIMS, OR FOR
ANY OTHER USE, INCLUDING DESCRIPTION OF THE PRODUCT'S APPLICATION, OPERATION, INSTALLATION
AND TESTING IS USED AT THE SOLE RISK OF THE USER AND WHEELOCK WILL NOT HAVE ANY LIABILITY
FOR SUCH USE.
