Wheelock AIM-3 Installation Instructions Manual Download Page 12

AIM-3 

Manual 

 

     P83667 

Rev. C July 2003 

 

          Sheet 12 of 12 

 

Limited Warranty 

 

Wheelock products must be used within their published specifications and must be PROPERLY specified, applied, installed, operated, 
maintained and operationally tested in accordance with these instructions at the time of installation and at least twice a year or more 
often and in accordance with local, state and federal codes, regulations and laws.  Specification, application, installation, operation, 
maintenance and testing must be performed by qualified personnel for proper operation in accordance with all of the latest National 
Fire Protection Association (NFPA), Underwriters' Laboratories (UL), Underwriters’ Laboratories of Canada (ULC), National 
Electrical Code (NEC), Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and 
other applicable building and fire standards, guidelines, regulations, laws and codes including, but not limited to, all appendices and 
amendments and the requirements of the local authority having jurisdiction (AHJ).  Wheelock products when properly specified, 
applied, installed, operated, maintained and operationally tested as provided above are warranted against mechanical and electrical 
defects for a period of three years from date of manufacture (as determined by date code).  Correction of defects by repair or 
replacement shall be at  Wheelock's sole discretion and shall constitute fulfillment of all obligations under this warranty.  THE 
FOREGOING LIMITED WARRANTY SHALL IMMEDIATELY TERMINATE IN THE EVENT ANY PART NOT FURNISHED 
BY WHEELOCK IS INSTALLED IN THE PRODUCT.  THE FOREGOING LIMITED WARRANTY SPECIFICALLY 
EXCLUDES ANY SOFTWARE REQUIRED FOR THE OPERATION OF OR INCLUDED IN A PRODUCT.  WHEELOCK 
MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS, IMPLIED OR STATUTORY 
WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER. 
 
USERS ARE SOLELY RESPONSIBLE FOR DETERMINING WHETHER A PRODUCT IS SUITABLE FOR THE USER'S 
PURPOSES, OR WHETHER IT WILL ACHIEVE THE USER'S INTENDED RESULTS.  THERE IS NO WARRANTY AGAINST 
DAMAGE RESULTING FROM MISAPPLICATION, IMPROPER SPECIFICATION, ABUSE, ACCIDENT OR OTHER 
OPERATING CONDITIONS BEYOND WHEELOCK'S CONTROL. 
 
SOME WHEELOCK PRODUCTS CONTAIN SOFTWARE.  WITH RESPECT TO THOSE PRODUCTS, WHEELOCK DOES 
NOT WARRANTY THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE OR 
THAT THE SOFTWARE WILL MEET ANY OTHER STANDARD OF PERFORMANCE, OR THAT THE FUNCTIONS OR 
PERFORMANCE OF THE SOFTWARE WILL MEET THE USER'S REQUIREMENTS. WHEELOCK SHALL NOT BE LIABLE 
FOR ANY DELAYS, BREAKDOWNS, INTERRUPTIONS, LOSS, DESTRUCTION, ALTERATION, OR OTHER PROBLEMS 
IN THE USE OF A PRODUCT ARISING OUT OF OR CAUSED BY THE SOFTWARE. 
 
THE LIABILITY OF WHEELOCK ARISING OUT OF THE SUPPLYING OF A PRODUCT, OR ITS USE, WHETHER ON 
WARRANTIES, NEGLIGENCE, OR OTHERWISE, SHALL NOT IN ANY CASE EXCEED THE COST OF CORRECTING 
DEFECTS AS STATED IN THE LIMITED WARRANTY AND UPON EXPIRATION OF THE WARRANTY PERIOD ALL 
SUCH LIABILITY SHALL TERMINATE.  WHEELOCK IS NOT LIABLE FOR LABOR COSTS INCURRED IN REMOVAL, 
REINSTALLATION OR REPAIR OF THE PRODUCT BY ANYONE OTHER THAN WHEELOCK OR FOR DAMAGE OF ANY 
TYPE WHATSOEVER, INCLUDING BUT NOT LIMITED TO, LOSS OF PROFIT OR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES.  THE FOREGOING SHALL CONSTITUTE THE SOLE REMEDY OF THE PURCHASER AND THE EXCLUSIVE 
LIABILITY OF WHEELOCK. 
 
IN NO CASE WILL WHEELOCK'S LIABILITY EXCEED THE PURCHASE PRICE PAID FOR A PRODUCT. 
 

Limitation of Liability 

 

WHEELOCK'S LIABILITY ON ANY CLAIM OF ANY KIND, INCLUDING NEGLIGENCE AND BREACH OF WARRANTY, 
FOR ANY LOSS OR DAMAGE RESULTING FROM, ARISING OUT OF, OR CONNECTED WITH THIS CONTRACT, OR 
FROM THE MANUFACTURE, SALE, DELIVERY, RESALE, REPAIR OR USE OF ANY PRODUCT COVERED BY THIS 
ORDER SHALL BE LIMITED TO THE PRICE APPLICABLE TO THE PRODUCT OR PART THEREOF WHICH GIVES RISE 
TO THE CLAIM.  WHEELOCK'S LIABILITY ON ANY CLAIM OF ANY KIND SHALL CEASE IMMEDIATELY UPON THE 
INSTALLATION IN THE PRODUCT OF ANY PART NOT FURNISHED BY WHEELOCK.  IN NO EVENT SHALL 
WHEELOCK BE LIABLE FOR ANY CLAIM OF ANY KIND UNLESS IT IS PROVEN THAT OUR PRODUCT WAS A 
DIRECT CAUSE OF SUCH CLAIM.  FURTHER, IN NO EVENT, INCLUDING IN THE CASE OF A CLAIM OF 
NEGLIGENCE, SHALL WHEELOCK BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.  SOME STATES 
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE 
PRECEDING LIMITATION MAY NOT APPLY TO ALL PURCHASERS. 
 

Summary of Contents for AIM-3













Reviews: