Additional Mower Instructions
GEAR CLEARANCE ADJUSTMENT
Ignore the gear clearance adjustment instructions
shown on page
2
of the owners
manual.
ASSEMBLY
Section
F,
Page
2,
should read as
follows:
Attach the mower wheel, lever, and shoulder
bolt to the slide plate as shown on the
exploded
view drawing. The wheels
must
be installed with
the long part of the hub toward the mower deck. The
wheels can be moved up or down to obtain cutting
heights of
1
�II to
3".
In
the
raised position the mower
cuts a full
3�"
high.
MOWER
HEIGHT ADJUSTMENT
Different cutting heights can be obtained by
pull
ing the heights adjusting lever and moving it
up
or
down to
tlie
desired notch.
(See Figure
1 .)
Note:
The mower must be in the
"up"
position before any
adjustment can be made.
Figure
MOWER
REMOVAL
To remove the mower from the tractor proceed as
follows:
1.
Disengage mower lift arm.
2.
Loosen mower belt, remove belt, and wire
belt guide.
3.
Remove the
%/1
bolts,
spacers, washers, and
nuts holding the mower hanger a
r
m
s
.
4.
Pull the mower from under the tractor.
www.MyWheelHorse.com
