page 3 – 8
E-1 / Apr 2010
M A S T E R P A N E L
Events
The E-1 includes a snapshot save and recall fea-
ture that saves all of the surface’s switch, level, and
DSP settings to a unique Event file. These saved
Events may be recalled as required at any time. User
access privileges may be configured to limit access
to Event Save, Recall, or both. Click on the
Events
Tab or press either EVENT button (VIEW or SAVE) on the Monitor Panel to
open the Events
Tab.
The Events Tab is split into two sections - Event Recall and Event Editor
.
EVENT RECALL, located in the top section of the tab, allows users to select
and recall a previously saved Event. Highlight the Event name in the list window,
then press ARM, then press TAKE. Note that the board will completely reset
to the previously saved state. In order to accommodate Event switching while
OnAir, any faders which are ON when the Event is recalled will NOT be affected.
The EVENT EDITOR acts an Event file manager. This is where you create,
save, rename, and delete Events. It is pretty easy to use. To create a new “snapshot,”
simply click NEW and enter an Event name using the pop-up virtual keyboard.
Highlight an existing Event name and click SAVE TO to overwrite the Event
with the current surface configuration, RENAME to retitle it, or DELETE to
permanently remove it.
Deleted Events may NOT be restored.
NOTE: The following
characters are forbid-
den to use in Event
names: \, /, :, *, ?, ",
<, >, |.
E-1 / Jan 2014