- 3 -
CAUTION
are high voltage components inside the amplifier.
■
Installing the amplifier
DO NOT
remove nor plug-in the power supply plug with wet hands, for it may cause
electric shock.
When unplug the power supply cord, be sure to grasp the power supply plug. DO
NOT pull on the cord itself. Operating the amplifier with damaged power
supply cord may cause fire or electric shock.
Avoid
installing the amplifier in humid or dusty places, the area exposed to the direct
sunlight, locations generating smoke or steam, or the spot near the heaters.
It may result in fire or electric shock.
When moving the amplifier, be sure to remove its power supply cord from the wall
outlet. Moving the amplifier with the power cord connected to the outlet may
cause damage to the power cord, and resulting in fire or electric shock.
When removing the power cord, be sure to grasp its plug to pull.
DO NOT
block the ventilation slots of the amplifier chassis. It will cause the
temperature rising and result in fire.
Use of the amplifier
Make sure that the volume control is turned to minimum position before power is
switched on. Loud sound produced at high volume when power is switched
on may impair hearing.
DO NOT
place heavy objects on the amplifier, for it may cause it fall and may result in
body injury and/or property damage. Besides, the object itself may cause
damaged or body injury.
DO NOT
operate the amplifier for the extended period of time with the sound distorting.
It is an indication of malfunction, which can cause heat and result in fire.
Switch the power off, and unplug the power supply plug from the AC outlet for safety
purposes, when cleaning or leaving the amplifier unused for 7 days or more.
Fire or electric shock may occur.
If the dust accumulates on the power supply plug or in the wall AC outlet, fire may
result . Clean it periodically. In addition, make sure the plug is inserted in
the wall outlet securely.
Contact your local dealer to clean the dust, if the dust has accumulated in the amplifier
for a long period of time. Dust accumulation may result in fire or damage.
2. Description
AMP 120-100V series is a 5 channel mixer amplifier designed for up to 5 microphones plus
3 AUX and one Tel input application, selectable with rear switches.
Each channel has its own volume control. Besides, there are 1 Master control of output
volume, and 2 tone controls: Bass and Treble.
Mic1 input has VOX priority which will override Channel 3~5 and Line input signals but
NOT the Channel 2 input.
The output connection is low impedance 8 ohm and high level 70 or 100V screw terminal .
To ensure the amplifier safety, it has speaker short, over temperature, and over load
protection.
