WALL MOUNTING
6
heads and carefully lower the unit onto the screws.
The Satellite and Centre loudspeakers are provided with
integral keyhole mounts for wall mounting.
Remove the loudspeakers from the wall ready for connection.
After connection they can be re-installed on the wall.
Wall mounting should be carried out by
VR-SURR 1; VR-SURR 2
Before you attempt wall or ceiling mounting, ensure the surface
is stable and strong enough to support the weight of the speaker
and mounting hardware.
Determine the location of the loudspeakers. Identify your
loudspeaker from the drawings on this page.
VR-CEN 1; VR- CEN 2
Mark off a horizontal line on the wall. Use a spirit level to ensure
that the line is accurately drawn. Mark off two points on this line
at the mounting centres indicated in the drawings.
Drill two 6mm holes in the wall at the points marked. Fix a
suitable No 8 round head screw firmly into each hole using
appropriate wall plugs. Leave a stub of 5mm protruding from
the wall. Align the holes in the mounting brackets over the screw
licensed sound contractors or
technicians with appropriate qualifications and experience. All
installation and wiring should comply with the relevant standards laid
You will need one No.8 screw and a matching wall plug per
down by the competent authority in the country and place of
speaker. Proceed as outlined above and attach each
installation.
loudspeaker to the wall via the single keyhole slot integrated
into the crossover connection panel.
You will need 2 No.8 screws and matching wall plugs to attach
each loudspeaker to the wall. These are the responsibility of the
installer who should supply suitable fixings for this purpose.
6.0mm
b
5mm
No 8 x 40mm
d
c
e
VR-SURR 1
310 mm
VR-CEN 2
VR-SURR 2
VR-CEN 1
+
_
360 mm
