Television picture colour is distorted
Subwoofer too close to TV. (Switch off system and TV. Move units away. Leave 15 mins. Switch on.
Excessive bass distortion at low volumes
Subwoofer level set too high; LFE level set too high; Subwoofer incorrectly wired
Excessive or distorted bass at high levels
System level set too high; Bass control set too high; Speakers too close to room corners
Popping or thumping from the subwoofer
System level set high; Subwoofer level set too high; LFE level set too high
Indistinct sound; Poor localisation of
effects. Poor localisation of dialogue
One or more loudspeakers is out of phase. Check all system connections and rectify.
(Read the manual for correct connection procedure)
Distorted / rattling sounds at high levels
System level too high; Objects on speakers/subwoofer; Objects too close to subwoofer
Sound lacks bass content
Bass reproduction indistinct
Front loudspeakers out of phase. Check all system connections and rectify.
Subwoofer not switched on; Subwoofer phase incorrect; Subwoofer crossover control too low
No Sound
System not switched on; Speaker cables shorting terminals out; Wrong source selected
Symptom
Possible Cause
TROUBLESHOOTING -
If your system is not working properly please work through this checklist before returning a unit to your dealer.
Before investigating a problem, always switch off the system at the mains.
FURTHER INFORMATION
14
SPECIFICATIONS
Format
Bass unit
Tweeter
Rec. Amplifier Power
Nominal Impedance
A/V shielding
Sensitivity (1W @ 1M)
Freq. Response (-6dB)
Cabinet Volume
Size (H x W x D)
VR-50
Stand/Bookshelf
Loudspeakers
VR-100
Stand: Ported
125mm
25mm
10 -100 W
6 Ohms
Yes
8
6
dB
65 Hz-20kHz
6.2 Litres
296 x 194 x 200 mm
Stand: Ported
150mm
25mm
10 -100 W
6 Ohms
No
87 dB
60 Hz-20kHz
10 Litres
365 x 223 x 220 mm