3
1. Volume control: This knob controls the overall volume of the PSX.
2. HI and LOW EQ (equalization) controls: These knobs control the equalization of overall output signal
pr/-12dB of gain for each band.
3. MIC/LINE switch: This switch selects the proper gain structure for INPUT. If a microphone is connected
to INPUT, use MIC mode(up). If the signal source is anything other than a microphone (playback device,
keyboard or mixer output, for instance) use the line mode(down)
4. TRS jack and XLR sockets for INPUT: These convenient jacks allow the TRS jack and male XLR balanced
input connections to be used as INPUT.
5. XLR line level OUTPUT: This connector provides a balanced line level output for connection to additional
PSX models or powered subwoofers.
6. POWER ON/OFF switch, turns the poweron and off.
7. POWER cord receptacle: This is a receptacle for a standard IEC, three prong, grounded AC electrical
connection cord. Be sure that you are plugging into the correct source voltage that matches what is
indicated just below the power cord jack.
8.POWER LED and LIMIT LEDs
The LIMIT LED illuminates when the signal limiter is limiting the level of the signal to prevent distortion and
overload.
REAR PANEL FEATURES
2
5
6
7
2
5
6
7
8
8
1
3
4
1
3
4
