1. READ ALL INSTRUCTIONS – carefully and become familiar with the features and functions of these prod-
ucts before operating them.
2. RETAIN THESE INSTRUCTIONS – for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be adhered to.
4. USE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is advisable to
establish and follow a routine for powering up and powering down a sound system. With all system com-
ponents connected, turn on source equipment (mixers, signal processors, record and playback units, etc.)
BEFORE powering up amplifiers. Transient voltages from powering up source equipment can damage
speakers if amplifiers are already turned on. Make sure that amplifier volumes are set to their minimum
settings and power up any system amplifiers LAST. It is recommended that all system components be
allowed to stabilize for several seconds before any source signals are introduced or level setting adjust-
ments are made. Similarly, when shutting systems down, turn all amplifiers off first, before powering
down any other system components.
5. CABLES – Do not use shielded or microphone cables for connection between amplifiers and speakers.
Use only approved speaker cables with proper connectors.
6. CAUTION – These professional loudspeaker systems are capable of generating very high sound pres-
sure levels. Use care with placement and operation to avoid exposure to excessive volume levels. Perma
-
nent hearing damage can result when operated to extreme levels.
7. SERVICE – There are no user serviceable parts inside this product. Users should not attempt to service
this product. Warranty nullification could result if this is attempted.
8. RIGGING - SUSPENDING - MOUNTING - Rigging suspending or mounting of speaker systems can expose
members of the public to serious health risks and even death.
UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT THESE SPEAKERS
UNLESS YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT LOCAL, STATE AND
NATIONAL AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE
NOT PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT REGULATIONS, CONSULT QUALIFIED
PERSONNEL FOR ADVICE.
2
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1. Ensure the mains switch is in the off position.
2. Set the level control to minimum (Fully anticlockwise).
3. Set the EQ controls to 0dB.
4. Select mic/line input.
5. Connect all signal cables.
6. Connect the power cable.
7. Switch on source equipment, ensuring that the master level is at minimum.
8. Switch on the PSX Loudspeaker.
9. Raise the level control on the PSX.
10. If the limit LED illuminates lower the level control, if more level is required you will need more speakers.
Occasional flashes are acceptable.
11. When powering down your system ensure that the level control has been lowered to minimum before
switching off the power.
SETTING UP
