10
Assembly Instructions
10.
Align and attach bottom shelf assembly to one Side Frame Assembly (H) with two Barrel Nuts (5) and
three 60 mm Bolts (7).
11.
Attach the Lower Back Panel (D) to the Side Frame Assembly (H) with two Barrel Nuts (5) and two 60 mm
Bolts (7) as shown.
12.
Attach the other Stretcher (G) to the top front of Side Frame Assembly (H) with one 60 mm Bolt (7).
Make sure that the mounting holes for Desk Top (A) will face upward when the unit is turned upright.
13.
Repeat the same process to attach the other Side Frame Assembly (H) at the opposite end.
NOTE
:
DO NOT
fully tighten the bolts in this step.
14.
Glue two Wood Dowels (3) into the top inner holes of Lower Back Panel (D) and attach the previous
assembly to the Desk Top (A) with six 30 mm Bolts (6).
G
D
E
G
H
H
E
G
7
5
5
7
G
H
H
G
6
A
G
H
D
H
D
A
3
6
6
H