Page
17
Assembly Instructions
21. Put the Suction Cups (1) firmly into the top holes on the Crossbars (F, G and H) and the
Stringers (I, J and K).
TIP:
If a suction cup resists insertion, try pressing down on the middle of
the cup with the Allen Wrench while twisting it clockwise into the hole.
22. Set the Glass Shelves (N, O & P) in place, with the black side of the glass shelf down, onto
the inserted Suction Cups (1), starting with the Bottom Glass Shelf (P), as shown. Make sure
that the arrow on the center sticker on each glass shelf aligns with the center of the Back
Panel (C) properly. Push each glass all the way back against the post of the Left & Right Side
Frames.
NOTE
: If a glass shelf is scratched, you can minimize the damage by using a BLACK marker
and filling in scratched area from underneath.
Suction Cup
(15 used in this step)
①
H
J
