Page
13
Mounting Monitor Bracket to a television with a flat back
NOTE
: For televisions with a curved or recessed back, proceed directly to the next page.
14. Determine the correct diameter of the bolt your TV requires by hand threading them into the
threaded inserts on the back of the TV. If you encounter any resistance, stop immediately. If
you are unable to find the correct bolt consult a local hardware store.
15. Follow the appropriate diagram above to attach the Monitor Brackets (S) to the back of your
TV with the selected fasteners. Make sure the Monitor Brackets are centered and level with
each other. Secure the bolts with a Phillips screwdriver.
DO NOT
over tighten the bolts.
NOTE:
Lean the TV up against a wall or other solid surface when attaching with the Monitor
Brackets. DO NOT place the TV face down on the glass, this may cause permanent damage.
TV