6
B
F
H
UP
UP
3
1
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Securely screw the Cam Bolts (2) into the designated plastic bushings on the Top Panel (A), the Base
(B) and the Center Shelf (C) using a Phillips screwdriver.
3.
Insert four Wood Dowels (3) into the bottom inner holes on Lower Side Panels (F and H). Tap in with a
rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.
4.
Align the drilled holes on the Base (B) with the inserted Wood Dowels (3) on the Lower Side Panels (F
and H), and then press them together. Attach the Lower Side Panels (F and H) in place by engaging four
Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
A
B
C
2
