13
Assembly Instructions
16.
Ask for assistance to lay down the assembled unit at its front edges.
17.
Using the pilot holes as a guide, attach two Straight Metal Brackets (9) at the joints where the Middle
Crossbar (H) meets the Middle Stiles (I) with four 12 mm Screws (4).
18.
Now, go back and tighten all Cam Locks and Screws, make sure that all the parts are tight and there are no
gaps between the parts, this will help keep the unit square.
19.
Pick up the Middle Back Panel (Q) and align the drilled holes against the upper long edge with the pilot
holes on the back stretcher of the Top Panel (A). Attach the Middle Back Panel (Q) in place using the
provided Washer Head Screws (5).
20.
Align and attach two Side Back Panels (R) to the mantel with the provided Washer Head Screws (5), using
the pilot holes as a guide.
NOTE
: We recommend attaching back panel with the screws at the corners first.
D
I
E
H
I
4
9
H
I
C
E
Q
R
R
C
5
5
Q/R