Model # BBXL54NV
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing
Page 22 Factory No. 16434
Assembly Instruction for installing the Mounting Frame onto BRICK,
SOLID CONCRETE OR CONCRETE BLOCK WALLS
NOTE:
If you are mounting your TV to a wall with wooden studs, skip this section.
This
assembly
requires an
electric drill and level (not included).
35. Begin by placing the Mounting Frame (J) level against the wall where you intend to mount the
TV. Using the Mounting Frame (J) as a template, mark 4 drill points with a pencil.
36. With an electric drill (not included) on its low setting, drill 7/16 inch diameter holes to at least
2½ inch deep. Insert Concrete Anchors (10) into the pre-drilled holes so that they are flush
with the wall.
37. Place the Mounting Frame (J) level in the desired position against the wall. Secure the
Mounting Frame (J) to wall with Lag Bolts (11) and the Washers (12) at the drill points. Tighten
the bolts firmly, but be careful not to over-tighten.
Concrete Anchors should only be used for masonry mounting.
NEVER use the wall anchors to mount the unit to drywall.
Maximum weight 135 lb. (61.2 kg)
2.50" (63 mm)
0.4375" (1
1 mm)