6
Utility Drawer Assembling
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Securely screw the Small Cam Bolts (11) into the designated small holes on the Utility Drawer Front (H)
using a Phillips screwdriver.
3.
Glue the M6 x 30 mm Wood Dowels (4) into the inner holes of Utility Drawer Side Panels (J and K).
NOTE
: It is very important to use a small amount of glue on both ends of dowels.
4
4
J
K
4
4
11
H