19
Assembly Instructions
31.
Insert the assembled drawers into frame. To insert the assembled drawers into your unit, extend the Ball
Bearing Slide Tracks on the Side Panels (B and C) all the way forward (including ball bearing cart).
Then, align the Slide Runners on the assembled drawers with the Slide Tracks and push the drawer
carefully inside until it stops.
NOTE:
If the drawer does not go in smoothly, please take it out and repeat the step. If you need to
remove the drawer, please pull the drawer all the way out, then simultaneously push the plastic release
lever of the ball bearing slides up on one side and down on the other side, and then pull it completely
out.
A
B
M
H