• Mark the hole centres through unit backplate.
• Drill holes in wall and fit wall plugs (if necessary).
Use 6mm masonry bit.
• Secure the backplate to the wall using
supplied screws.
• Use screw locations 1,2,3. Locations A and B
are optional.
3. Mounting your pump to the wall
• Push the pipes into the fittings to the full depth of
insertion. Secure by fitting collet clips supplied.
Use silicone spray to aid pipe insertion in order to
prevent the 'O' ring being displaced or rolled.
4. Plumbing connections
9
B
A
B
A
