2
IN
S
T
A
L
L
A
T
IO
N
IN
S
T
R
U
C
T
IO
N
S
3
IN
S
T
A
L
L
A
T
IO
N
I
N
S
T
R
U
C
T
IO
N
S
®
Reverse Battery Protection
This feature prevents permanent damage to the converter from an incorrect
battery connection.
Automatic Cooling Fan
The fan is variable speed and current controlled.
Electronic Current Limiting
Automatically shuts down power during overload or short-circuit conditions.
Automatically returns to normal operation after conditions are corrected.
DC Fuses
Reverse battery protection fuses; replace only with
ATC “Littelfuse ” Type 257 fuse.
Lightweight
-
35 A unit weighs only 9.03 lbs.
- 45 A unit weighs only 11.20 lbs.
- 55 A unit weighs only 11.57 lbs.
- 65 A unit weighs only 14.33 lbs.
- 75 A unit weighs only 14.88 lbs.
®
TM
TM
CHASSIS
(EARTH)
GROUND
Distribution Panel/
Power Center
WF-8930/50NP
GROUND BAR
General Consumer Information
12 V
BATTERY
OEM Installation of the WFCO WF-9800 Series Power Center
Select a mounting location near the shore power and battery (batteries).
- Do not mount in an area where the owner may store items, as this
could reduce the clearance requirements, obstruct ventilation
openings and affect the efficient operation of the converter.
- Do not install close to appliances that are a source of heat or water
(such as water heaters, furnaces, and under refrigerators). It is not
designed for mounting in wet locations. It must be protected
from direct contact with water.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE.
The fuse rating which the manufacturer suggests for the output fuses
will be marked on the unit. Replace only with same type and rating.
During the manufacturing process, be sure that all converter openings are
protected from debris falling into the unit. T
his is a non-warranty item
.
NOTE:
If the reverse battery protection fuses are blown during
installation, be sure that the battery has been connected properly, then
replace the fuses with ATC “Littelfuse ” Type 257 with the same rating as
the original.
WARNING
!
!
CAUTION
!
!
This equipment employs components that tend to produce arcs or sparks.
To prevent fire or explosion,
DO NOT INSTALL IN COMPARTMENT CONTAINING
BATTERIES OR FLAMMABLE MATERIALS (LP gas)
.
