Wexxar WF30T, Operation And Service Manual

Page: 79 / 190

WF30T Case Former Case Size Adjustments
7-66
7.6 Flat Case Width (Dimension ‘A’)
Figure 7-19: Dimension ‘A’
The magazine must be adjusted to suit the width
of the flat case (Dimension ‘A’). To do this,
1) Adjust the telescoping side of the
magazine assembly by loosening the two
purple quick-adjust handles and sliding
the empty magazine pusher assembly in
or out to suit the particular case with an
additional ¼” of free space. See Figure 7-
20.
2) Retighten the loosened quick-adjust
handles when finished.
3) Pivot the angle guide on the pusher
assembly firmly against the cases to
ensure that they are tight against the
magazine backing plate.
Check the ‘S’ box for Satisfactory Performance and ‘US’ box for Unsatisfactory Performance.
Table 22: Dimension 'A' Adjustments
Size Adjustments
Flat Case Width (Dimension ‘A’)
S US
Loosen the quick-adjust handles on the ‘A’ adjustment assembly.
Slide the magazine pusher assembly
IN
or
OUT
to fit case with ⅛ ”-¼”
clearance to guide bar.
Pivot the angle on the pusher assembly to contact the cases for additional
support.
Retighten the loosened quick-adjust handles.
Figure 7-20: Dimension ‘A’ Locking
Handles
Purple quick-adjust
locking handles