B E L 1 8 0 S E M I - A U T O M A T I C R A N D O M T A P E S E A L E R
7
3. On the right side of the holder at the top in the raised position, there is a latch that locks
the tape head into the holder. It must be released to remove the head from the holder.
4. To lower the bottom head back down into the machine frame, use the lever to take the
weight of the head and pull the latch pin out to release the lever arm.
5. Once the tape has been changed or the tapehead has been remounted in the bottom holder
and the guard doors closed, turn the TAPE HOLDER selector switch to DOWN and push
the RESET button to lower the holder back down into the bottom frame.
65-34-5 4/21/10
