WD-59CT & WD-66CT
Rev. 2.0 (20110124)
Installation
9
3.5 Unpacking
•
Check against the delivery note that all the units have been delivered.
•
Remove the packaging, but leave the pallet and any transport supports in
place.
•
Inspect the machine for any transport damage.
•
Lift the section at both ends using a handtruck. Assemble the legs (B) so
that they extend below the bottom edge of the pallet (C). Lower the section.
Split the pallet and take it away.
•
If the section should need to be lifted again from the short sides, a wooden
runner should be placed under the cross-bar (A) on the section stand.
A=Stand cross-bar
B=Leg
C=Pallet
D=Handtruck
Packaging must be disposed of or recycled in accordance with local regulations.
66CT_03
A
A
B
C
D
