ST-1100
Link: https://help.wextelematics.com/installation-guide/st-1100/ Last Updated: January 23rd, 2017
Copyright ©2021 Wex Telematics
Page 3 of 6
3. Device installation.
The ST-1100 can be mounted using one of the two methods.
Adhesive Mount
For the best results, the mounting surface temperature should be between 50 and 100°F (10-37°C).
Using the supplied self-tapping screw, secure the eyelet of the tether using a 5/16″ (8mm) nut
1.
driver and straighten tether (as shown below).
Note.
Apply a small amount of silicon around the head of the self-tapping screw to
prevent water damage.
Move the device to the side then using the supplied abrasive pad, lightly scratch the area
2.
identified in the previous step.
