I
M133 User Guide
4-31
10. The right panel shows any status change in the symbologies settings, as shown below:
11.
On the left panel, scroll to the top, scroll to the top, the user can also change the symbologies settings to default
setting:
12.
Once the user is done setting the symbologies, close the MotoSetting by clicking on the X on the top right, and
then go back to the HotTab utility.
13.
Open HotTab utility again by pressing
(Menu) Button located on the front panel, OR launching HotTab Utility
application.
14.
Choose “Device ON/OFF” and then click on “Barcode”