IX
Operation
Charging the Batteries
The work lights come with a charging cable which can connect to
any USB socket. Connect the cable to any USB socket or to one
of the included USB adaptors (100 - 240 V and 12 V) and con-
nect it to the charging socket (4). During charging the LED (5)
lights up red, after charging it changes to green.
If you have connected the work lights both oft hem are charged at
the same time. The work lights can be charged separately, too.
The 12 V USB adaptor is equipped with a fuse. To change the
fuse, unscrew the knurled nut and replace the fuse with one of
the same type and dimensions. After that, reassemble the adap-
tor. Make sure the connecting ring of the housing is placed cor-
rectly to secure the housing shells.
Operation
The On/Off button (3) is located below the light panel (2). Press
the button once to turn the work lamp on at full power and press
once more to turn on the work lamp at reduced power. Press for
a final time to turn off the lamp.
Fold out the suspension hook (6) on the back of the lamp to hang
up the lamp on a suitable place. So you always have both hands
free when working.
Alternatively use the turnable and tiltable magnetic holder (7)
located at the back of the lamp to mount the lamp on magnetic
objects.
