12
Set-up and Operation
OFF
Position for storing, shipping and non-use for
extended period of time,
position for initial 3-day charge. In this position the
battery is charged but the lights do not turn on.
2. Leave the switch in the OFF position for at least 3 sunny days.
After the initial charge, set the switch to the
AUTO
position.
Motion Sensor
There are two adjusting knobs on the motion sensor, TIME and
LUX.
TIME (8)
– Illumination Time
Setup how long the unit stays lit after motion stops in the field of
vision of the motion sensor. The time can be set from 10 seconds
to 1 minute. Please note, once the light has been triggered by the
sensor any subsequent detection will start the timed period again
from the beginning.
LUX (9)
– Lux Control Level/Ambient Light Adjustment
The lux control module has a built-in photocell that detects
daylight and darkness. Turn the knob towards (☼) to have the
motion sensor turning on the light during day and night, turn it to
(
) to have the light activated only at night.
If the light turns on in bright light conditions, turn the control
towards (
). However if the light does not turn on at night time,
turn this control towards the (☼) icon. The range is from 3 Lux to
max. 2000 Lux.
Function Test
1. Test the coverage of the area by walking slowly around the
area and re-adjust the sensor if necessary. Please keep in
mind that the motion sensor does not detect directly oncoming
movement very well.
