7
Using
Assembling and Start-up
Notes: The solar module serves as energy source for the solar
crystal glass light.
Direct sunlight
that shines as long as possible is
required in order to charge the internal battery. This way the solar
crystal glass light can be powered with electricity in darkness.
Please keep in mind that foreign light sources may turn the lights off
temporarily. Therefore, do not place the solar light near porch lights,
wall lights, motion detectors, street lights etc.
1. Dispose of the packaging materials carefully or store them in a
safe place. There is danger of suffocation for small children!
2. For safe transport the ground stake is
inserted into the pole. Pull out the ground
stake from the pole. Turn over the ground
stake and reinsert into the pole (see
picture).
3. Twist the solar panel unit from the glass
body of the lamp head. Remove the
plastic insulating strip from the battery
compartment. This strip served as a
transportation safety device. Reattach the
solar panel unit to the glass body.
4. Find a suitable location with direct
sunlight. Insert the ground stake vertically
in the ground. Do not use a hammer or similar to impose high
pressure upon the ground stake. Put the lamp head on top of the
ground stake.
5. Make sure that direct sunlight shines on the solar panel for at
least 8 hours a day in order to fully charge the built-in battery. At
nightfall the solar crystal glass light automatically lights up.
