7
Using
Handling / Installation
The LED work lamp is universal applicable and mountable.
You can hold the work lamp comfortably with one hand or simply
use the hook (9) to hang it up.
Alternatively the lamp can be attached with the magnetic holder
to a solid magnetic surface. This way the lamp can be placed to
the desired position at any time.
At the swivel joint (8) the lamp can be folded in three stages into
three working positions.
Charging the Batteries
Before you use the LED work lamp for the first time, please charge
the batteries completely.
1. Plug the charger (10) into a wall socket and connect it to the
charging socket (4) which is located behind the rubber cap at the
side of the lamp.
2. The charging indicator (5) shines red. When the battery is
completely charged, the charging indicator turns green. Pull out
the plug of the charger and remove it from the wall socket.
Using the 12 V Car Adaptor
When charging the unit in a motor vehicle, use the 12 V car adaptor
only in a stationary vehicle with the engine off. It is not allowed to
operate the unit from the electric system of a vehicle while driving.
1. Connect the 12 V car adaptor (11) to the cigarette lighter socket
in your vehicle and to the charging socket (4) which is located
behind the rubber cap at the side of the lamp.
2. The charging indicator (5) shines red. When the battery is
completely charged, the charging LED turns green. Pull the plug
of the car adapter and remove it from the cigarette lighter socket
in your vehicle.
Note: The 12 V car adaptor resp. the charger and the LED work
lamp can heat up during charging.