Wetelux 70 77 29, Instruction Manual

Page: 10 / 15

5
English
Installation
Please Notice: To avoid accidents, the unit may only be installed by a certified
electrician, and according to the applying regulations.
The lamp may only be mounted on normally inflammable surfaces.
The lamp must be mounted in such a way that no surfaces closer than one
meter are directly illuminated.
The lamp should be mounted at least 2.5 meters above the ground.
Changing the Illuminant
Before changing the illuminant, make sure the lamp is disconnected from the
power supply and lamp and illuminant have fully cooled down. Use only
illuminants of the type R7s with a power output of no more than 300W.
Do not touch the new illuminant with bare fingers. Fingerprints will burn into
the surface and damage the performance.
To change the illuminant, open the quick release clamps on the top of the unit
and detach the front screen.
Cleaning and Maintenance
The unit is weather resistant. Still avoid cleaning it with a direct jet of water or
similar. Clean the lamp only while it is not connected to the power supply and
cooled down. Use a moist or wet cloth; do not use solvents or abrasives.