Wet Sounds XS-650, Owner'S Manual

Page: 2 / 4

Thank You for purchasing this Wet Sounds product !
Wet Sounds professional marine audio products represent the ultimate in high performance
marine audio. Wet Sounds speakers are specifically engineered to withstand the rigorous
marine environment. These speakers were designed to provide amazing output combined
with a cutting edge style. Utilizing state of the art acoustic engineering and three
dimensional computer aided design, the Wet Sounds marine speakers represent the most
advanced marine speakers in the world.
Wet Sounds XS-650 and XS-65 are component style coaxial drivers. Using advanced
materials throughout such as our exclusive Nylas
frame and grill and rubber spider.
Nylas is a composite mix of Nylon and Fiberglass providing improved marine stability and
strength over conventional materials normally used in marine speakers. Wet Sounds has
also developed a rubber spider for our marine speakers. Rubber is used for the spider as
most marine speakers use cloth that will deteriorate over time. The Wet Sounds marine
speakers are built to last in the harshest environments. Also they feature a separate
tweeter that is grille mounted vs. pole piece mounted. This style of mounting system keeps
a sealed woofer eliminating the chances of water intrusion down the pole piece as common
with other marine/car audio coaxials.
Please take a moment to read the instruction manual before starting your installation. If
you have any questions or concerns, please contact your certified Wet Sounds dealer or Wet
Sounds at 877-938-7757.
SPEAKER SPECIFICATIONS
XS-650S
XS-650B
(Silver Cone)
(Black Cone)
RMS Watts 100 Watts
Peak Watts 200 Watts
Mid Bass 6.5 inch composite woofer with rubber surround
High Frequency Coaxially mounted Titanium Tweeter
Impedance 4 ohm
Frequency Response 40Hz to 22KHz
Sensitivity 90dB at 1W/1m
XS-65S
XS-65B
(Silver Cone)
(Black Cone)
RMS Watts 60 Watts
Peak Watts 120 Watts
Mid Bass 6.5 inch composite woofer with rubber surround
High Frequency Coaxially mounted Mylar Tweeter
Impedance 4 ohm
Frequency Response 40Hz to 20KHz
Sensitivity 89dB at 1W/1m
TM
TM