Wet Sounds WS-220 BT Operations / Installation Manual
3
WS-220 BT FEATURES
The WS-220 BT is a 4 Zone level controller housed in a one half DIN chassis
using our exclusive design which allows the independent control of 4
zones which can be assigned to any audio components in a system. For
instance, Zone 1 could be set up for Tower Speakers, Zone 2 could be used
for In Boat Speakers, Zone 3 could be Cabin Speakers, and Zone 4 could be
Subwoofer(s). Levels can be set for each of these zones independently, then
the Master allows overall control of all 4 zones. The WS-220 BT includes a
talk back microphone with its own independent level control, allowing the
adjustment of the microphone level independently of the music. The talk
back microphone can be used to broadcast a voice over long distances –
similar to a public address system. When the talk button on the microphone
is pressed, music is automatically muted on Zone 1 and the microphone
audio is broadcast over Zone 1. When the microphone talk button is released,
music returns to the previous level.
1. Master Level.
This controls the overall volume of the system – overriding all zones with
the exception of the Mic level control.
2. Zone 1.
This controls the level of whatever amplifier is connected to it. Microphone
audio is broadcast on this zone only, so it is suggested that this zone be used for Tower
Speakers. The Master Level control overrides this zone control.
3. Zones 2-4.
These control whatever amplifiers are connected to them. These zones
are equal in operation, so they can be assigned in any way needed. The Master Level
overrides all these zones.
4. Mic.
This controls the level of the microphone when the talkback button is pressed. Mic
level is unaffected by the Master level control.
5. Source.
Allows switching between Main (head unit), Auxiliary (wired audio device), or
Bluetooth enabled wireless device.
1
2
3
4
5
