5
RECON 6 POD mounted on a Flat deck surface
Pre-scored area to remove
for running wires outside
the swivel Flange.
The Pod is fixed by the inserting the Fork & Screw after the Swivel
Flange is mounted to the flat deck surface. 360 degree swivel is
possible. Wires can be either run through the center of the Swivel
Flange through a hole in the flat deck. For no hole drilling, use the
pre-scored area to remove tab take a pair of pliers or others sharp
object to break tab & run wires outside the Swivel Flange.
Fork
Screw
If mounting the Pod at an
angle or inverted, simply
remove the 4 Philips head
screws holding the speaker
in the Pod, then rotate the
speaker so that the grill is
straight. Then re-insert the 4
screws.
Screws are inserted
through the swivel flange
into the flat deck surface.
Wet Sounds RECON 6 POD Enclosed Speaker System. Operations / Installation Manual
