Now it’s time to mount the clamps. Be sure to place the clamp over the inserts (if inserts are
used). Make sure the inserts and the two pieces of the clamp are touching. There should be
no gaps as the U-bracket has zero tolerance for flexing or movement. The U-bracket should
slide right into the grooves of the clamp to complete a snug fit. If there is a gap, make sure
you are using the proper size inserts and/or that the clamp is as tight as possible.
Attach the U-bracket to the speaker housing using the stainless steel bolts provided. Wet
Sounds recommends the use of Lock-Tite for these bolts. Once you have securely tightened
all the bolts in a crisscross pattern, you can then slide the speaker up onto the clamp.
Once the speaker is in place, use the Trick Connect™ bolts to hold the speaker in place.
Please make certain that all bolts are in place and are tightened before removing the
underneath support.
(Warning: It is the owner’s responsibility to ensure that all bolts are securely attached. It is
also recommend to re-check the Trick Connect™ bolts periodically as they will loosen with
time. It is also recommend to remove the speakers from the tower if towing long distances)
Now that you have the PRO 80 securely in place, insert the speaker connector to complete
the installation.
You are now ready to enjoy the greatest concert performance on water
3
