G O -
4 E V O p e r a t o r ’ s M a n u a l
| 47
Contact Westward Industries for Manuals and Documentation. Do not copy.
Changing Front Tire
WARNING:
Removal and installation of the front wheel is to be performed by certified service
technicians only. Do not attempt to remove or change the front wheel yourself. If the front tire
becomes flat have your vehicle towed to an authorized Westward GO-4 dealer or service
center.
Changing Rear Tire
Removing Rear Wheel:
WARNING:
To avoid bodily injury or death from
unexpected start-up of vehicle, turn off the vehicle
and remove the key from the ignition before starting
this procedure.
1. Break wheel lug nuts loose but do not remove.
2. Raise vehicle. Refer to section 5.1 - Lifting the
Vehicle and follow all warnings and guidelines in
the section.
3. Remove four lug nuts (A). Retain lug nuts.
4. Remove wheel cover (B) and tire from wheel
drive hub.
Installing Rear Wheel:
WARNING:
To avoid bodily injury or death from
unexpected start-up of vehicle, turn off the vehicle
and remove the key from the ignition before starting
this procedure.
1. Align and install tire on wheel drive hub.
2. Align and place wheel cover (B) on rim.
3. Install the four lug nuts (A). Torque nuts to 70 ft-
lb [95 Nm] following the proper tightening process
described in the Torque Specifications section
found at the start of section 5.9.4 Changing a Tire.
Torque nuts in sequence twice.
4. Lower vehicle.
