6
OPERATING INSTRUCTIONS
F
or each wash ensure that:
The water supply connections are secured*, the tap is turned on
(
Fig.10
) and the discharge hose is positioned correctly.
The programme selector (
P
) is in the stop position (STOP).
Then, with dry hands, insert the plug in the power socket (
Fig.11
).
Sort the washing into fabric types**.
Check that there are no objects in the pockets of the clothing to be
washed which may damage the fabric, washing machine or filter.
Open the door (
Fig.12
).
Load the washing in the machine and close the door.
N.B.Using detergent (Fig.13)
(Fig.14)
Each product poured into its respective section must not be allowed to
overflow. Should the detergent enter the softener section, the washing will
be rinsed in soapy water, leaving white marks. Vice versa, if the softener
enters the detergent section during the washing cycle, efficiency will be
affected.
Add the reduced lather detergent and softener (if required) specially
made for automatic washing machined). For the dosage, refer to the
instructions on the packet. In the case of soft water, reduce the
dosage.
N.B. Excessive use of softener may damage the fabric.
Close the soap powder container (Fig. 15).
Warning! Do not remove the soap powder container while the
machine is in operation, as this may cause water to spill out.
Select the most suitable programme and correct temperature from the
programme table***.
Fig 10 Fig 11 Fig 12
Fig 13 Fig 14 Fig 15
* See “Water connection” (page 4)
* See “Water connection” (page 4)
* See “Water connection” (page 4)
* See “Water connection” (page 4)
** See “Clothing symbols” (page5)
** See “Clothing symbols” (page5)
** See “Clothing symbols” (page5)
** See “Clothing symbols” (page5)
*** See Program tables (page 11
*** See Program tables (page 11
*** See Program tables (page 11
*** See Program tables (page 11-
--
-13)
13)
13)
13)
