Westlock Controls Corporation Intellis 7604, Installation And Operation Manual

Page: 23 / 39

Table 10-b
Switch S1
MAC
ID
Returned
Value
SW6 SW5 SW4 SW3 SW2 SW1
ON OFF ON ON OFF ON 45 0x2D
ON OFF ON ON ON OFF 46 0x2E
ON OFF ON ON ON ON 47 0x2F
ON ON OFF OFF OFF OFF 48 0x30
ON ON OFF OFF OFF ON 49 0x31
ON ON OFF OFF ON OFF 50 0x32
ON ON OFF OFF ON ON 51 0x33
ON ON
OFF
ON
OFF OFF 52 0x34
ON ON OFF ON OFF ON 53 0x35
ON ON OFF ON ON OFF 54 0x36
ON ON OFF ON ON ON 55 0x37
ON ON ON OFF OFF OFF 56 0x38
ON ON ON OFF OFF ON 57 0x39
ON ON ON OFF ON OFF 58 0x3A
ON ON ON OFF ON ON 59 0x3B
ON ON ON ON
OFF OFF 60 0x3C
ON ON ON ON OFF ON 61 0x3D
ON ON ON ON ON OFF 62 0x3E
ON ON ON ON ON ON 63 0x3F
3.1.2 Baud Rate and Address via the Bus
Setting S1 positions 7 & 8 to ON will allow the address and the baud rate of the DPAC to
be set via explicit messaging over the bus. Once the values for the specific attributes have
been set the DPAC must have the power cycled for the new settings to be loaded from the
devices RAM and become operable.
Refer to DeviceNet Object, Class Code 03 in Appendix B for the explicit messaging
codes.
When changing the baud rate of the DPAC, once the power to the device has been
cycled the master will need to be set to that baud rate to enable communication with the
DPAC.
Tech-309 3-4