background image

4

PRODUCT MANUAL

1800 358 101

[email protected]

www.westlab.com.au

+64 9 553 3677

[email protected]

www.westlab.co.nz

646 568 5391

[email protected]

www.westlab.com

1 877 822 1455

[email protected]

www.westlab.com

Australia

New Zealand

United States

Canada

3. Safety Precautions

Read the following safety precautions prior to using the multichannel pipette.  

Never use the unit in any manner not specified in this manual.

• 

Wear personal protective equipment during the operation of the unit.

• 

Do not use the pipette if it shows signs of electrical of mechanical damage. If any 

damage is found, contact your supplier immediately. 

• 

Do not use without appropriate training. Always follow the installation instructions.

The safety of the user cannot be guaranteed if the unit:

• 

Is operated with accessories that are not supplied with the unit.

• 

Is operated with accessories that are not supplied or recommended by  

the manufacturer.

• 

Is operated improperly or contrary to the manufacturer’s specifications.

4. Maintenance & Cleaning

• 

Wear protective gloves and safety glasses while cleaning the unit.

• 

After cleaning, ensure that all the parts are dried.

• 

If repairs are performed by unauthorised personnel, the product warranty may 

become void.

• 

It is recommended to use normal cleaning agents such as water with mild 

detergents, antiseptic agents or 60-70% ethanol.

• 

Recommended to check the pipette’s performance every three months.  

Pay attention to the tip cone.

5. Installation

1.   Open the packaging and gently remove the multichannel pipette from the box.
2.   Unpack every individual component.
3.   Assemble the components as instructed in this manual for optimal performance..

ATTENTION:

 The manual should be kept with the device and all the packaging should be 

kept in safe storage for at least two years for warranty purposes.

.

Summary of Contents for 665-259

















Reviews: