Westinghouse WWT1084C7WA, User Manual

Page: 19 / 44

19
1. Press Power ( ) touchpad, turn
the program selector to the required
program.
The relevant light will light up.
-
Your washing machine is now in
STAND-BY-MODE and ready to
wash your clothes.
-
The buzzer will sound.
-
Once you selecte a program, the
program selected will stay at that
position for the whole of the cycle.
-
The selector dial can be turned
either clockwise or anticlockwise.
-
The display shows the program
duration.
-
2. If you want your laundry to be
washed with functions different from
the one proposed by the machine,
press Water Level, Soak, Rinse and
Spin option touchpads.
If the settings shown on the control
panel are what you want to use,
press the Start/Pause touchpad to
start your wash.
NOTE:
To start a program, press the Start/Pause
( ) touchpad, a default program
duration will be displayed on the screen.
3. If you want to define the end of the
washing program, press the “Delay
End” touchpad repeatedly to choose
your machine end time.
Different functions can be combined
which is dependent on the program
selected. When these touchpads are
pressed, the corresponding pilot
lights come on.
When you select the Rinse Spin
program, there will be a delay of at least
2 minutes before the washing machine
starts to spin.
This delay is a drain out period to ensure
the bowl is empty of water, which is
necessary before spin commences. Even
though you may have only put wet clothes
into an empty bowl, the delay before spin
will still occur to be safe and to protect
your washing machine.
NOTE
It is possible to change only some
options after the program has started.
Press the Start/Pause touchpad to
enter PAUSE mode.
1.
Change the options. 2.
Press Start/Pause touchpad again.
The program will continue.
3.
The time remaining is blink and the
Start/Pause LED will start flashing. Press
the Start/Pause again. The program will
continue.
If you have started your wash and you
wish to stop it for some reason, press the
Start/Pause touchpad to enter PAUSE
mode.
Changing a running program is possible
only by switching off the appliance.
Press the “Power” touchpad to cancel
the program and to turn off the
appliance.
-
Press the “Power” touchpad again to
start the appliance.
-
Now you can set a new wash program
and change any available options. Press
Start/Pause to start the new program.
4.6 Setting a Program
4.8 Interruption Of A Program
4.9 Changing A Program
4.10 Changing The Options
4.7 Starting a Program