12
PREPARING THE MACHINE FOR USE
PREPARATION
PREPARING THE MACHINE FOR USE
When you STOP using combined detergents
• Fill the rinse aid compartments .
• Select a suitable rinse aid setting .
Filling with rinse aid and making the setting
Rinse aid is used to improve the drying of the wash
load and reduce the deposit of cloudy drops and
streaks on glasses and dishware . For this reason, care
should be taken that there is adequate amount of rinse
aid in the rinse aid compartment and only rinse aid
produced for use in dishwashers should be used .
If the rinse aid lamp on the control panel illuminates,
fill the rinse aid compartment with rinse aid .
1 To put in rinse aid, remove
the rinse aid compartment
cap by turning it .
2 Fill the rinse aid
compartment with rinse
aid until the rinse aid
level indicator becomes
dark; refit the cap by
locating the locking pins
and close it by turning in
the opposite direction .
By checking the rinse
aid level indicator on the
detergent dispenser, you
can understand whether
or not your machine needs
rinse aid . A dark indicator
means that there is rinse
aid in the compartment,
while a light indicator
shows that you need to
fill the compartment with
rinse aid .
3 The rinse aid level adjuster
can be set to a position
between 1 and 6 . Factory
setting for rinse aid is
position 3 . You need to
increase the setting of the
adjuster if water stains
form on your dishes after
a wash, whereas you need
to decrease the setting if
a blue stain is left when
wiped by hand .
1 2 3 4 5 6
TIPS & INFORMATION
TIPS AND INFORMATION
Only use rinse aid suitable for automatic dishwashers .
As rinse aid residues left as a result of overflowing will
create extremely high amounts of foam and reduce the
washing performance, remove the excess amount of
rinse aid by wiping it with a cloth . Remove all excess
rinse aid if spilt while filling .
1
2
3