background image

9

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Activation and deactivation

Touch 

 for 1 second to activate or deactivate  

the appliance.

Automatic switch off

The function deactivates the appliance automatically if: 

•   All cooking zones are deactivated (

). 

•    You do not set the heat setting after you activate  

the appliance. 

•    You spill something or put something on the control 

panel for more than 10 seconds, (a pan, a cloth, etc.). 
The sound operates until you remove the object. 
Remove the object or clean the control panel. 

•    The appliance become too hot (e.g. when a saucepan 

boils dry). Before you use the appliance again, the 
cooking zone must be cool.

•    You use incorrect cookware. The symbol 

 comes on 

and the cooking zone deactivates automatically after 
2 minutes.

•    You do not deactivate a cooking zone or change the 

heat setting. After some time,   comes on and the 
appliance deactivates. See the table.

The times of Automatic Switch Off

HEAT SETTING

COOKING ZONE DEACTIVATES AFTER

   - 

6 hours

 - 

5 hours

4 hours

 - 

1.5 hours

The heat setting

Touch 

 to increase the heat setting. Touch 

 to 

decrease the heat setting. The display shows the heat 
setting. Touch 

 and 

 at the same time to deactivate 

the cooking zone.

Automatic heat up

You can get a necessary heat setting in a shorter time if you 
activate the Automatic Heat Up function. This function sets 
the highest heat setting for some time (see the illustration 
above), and then decreases to the necessary heat setting.

To start the Automatic Heat Up function for a 
cooking zone: 

1. Touch 

. The symbol   comes on in the display. 

2. 

 Immediately  touch 

 adjacent to the element  

you want to control. The symbol   comes on in  
the display. 

3. 

 Immediately  touch 

 adjacent to the element you 

want to control again and again until the necessary 
heat setting comes on. After 3 seconds   comes on 
in the display.

4.    To stop the function touch 

 adjacent to the element 

you want to control. 

Power function

The Power function makes more power available to the 
induction cooking zones. The Power function is activated 
for 10 minutes at most. After, that the induction cooking 
zone automatically sets back to highest heat setting. 

To activate, touch 

 comes on. To deactivate, 

touch 

 or 

 adjacent to the element you want to 

control.

Power management 

  

 

The power management divides the power between 
two cooking zones in a pair (see the figure). The power 
function increases the power to the maximum level for 
one cooking zone in the pair and automatically decreases 
in the second cooking zone to a lower power level. The 
display for the reduced zone alternates.

Summary of Contents for WHI324BA

















Reviews: