background image

8 | Westinghouse Outdoor Power Equipment, LLC

 

CO SENSOR

The CO Sensor monitors for the accumulation of 

poisonous carbon monoxide gas around the generator 

when the engine is running. If increasing levels of CO gas 

are detected, the CO Sensor automatically shuts down the 

engine. 
The CO Sensor will also detect the accumulation of carbon 

monoxide from other fuel burning sources used in the area 

of operation. For example, if the exhaust of fuel burning 

tools is pointed at a CO Sensor-equipped generator, a 

shut-off may be initiated due to rising CO levels. This is not 

an error. Hazardous carbon monoxide has been detected. 

Move and redirect any additional fuel burning sources 

to dissipate carbon monoxide away from personnel and 

occupied buildings. 

Note: 

Remote start-equipped generators must be restarted 

with the START/STOP button on the control panel 

after an automatic shut-down occurs.

Generators are intended to be used outdoors, far from 

occupied buildings and the exhaust pointed away from 

personnel and buildings. If misused and operated in a 

location that results in the accumulation of CO, like in 

a partially enclosed area, the CO Sensor shuts off the 

engine, notifies the user with a RED indicator light, and 

directs the user to read the Action Label for steps to take. 

The CO Sensor 

DOES NOT

 replace carbon monoxide 

alarms. Install battery-powered carbon monoxide alarm(s) 

in your home. 

Automatic  shutoff  accompanied  with  a  flashing  RED 

light  in the CO Sensor portion of the control panel is an 

indication that the generator was improperly located. If 

you start to feel sick, dizzy, weak, or carbon monoxide 

detectors in your home indicate an alarm, get to fresh 

air immediately. Call emergency services. You may have 

carbon monoxide poisoning.

CONTROL PANEL CO AUTO-SHUTOFF

CO SENSOR INDICATOR LIGHTS

Color

Description

RED

Carbon monoxide accumulated around the 

generator. After shut-off, the RED indicator 

light in the CO Sensor area of the control 

panel  will  flash  to  provide  notification 

that the generator was shut-off due to an 

accumulating CO hazard. The RED light 

will flash for at least five minutes after a CO 

shut-off. 
Move the generator to an open, outdoor 

area far away from occupied spaces with 

exhaust pointed away. Once relocated to a 

safe area, the generator can be restarted. 

Introduce fresh air and ventilate the area 

where the generator had shut down. 

YELLOW

A CO sensor system fault occurred. When 

a system fault occurs, the generator is 

automatically shut down and the YELLOW 

indicator light in the CO auto-shutoff area 

of  the  control  panel  will  flash  to  provide 

notification  that  the  a  fault  has  occurred. 

The YELLOW  light will flash for at least five 

minutes after a fault. The generator can be 

re-started, but may continue to shutoff. A 

CO sensor fault can only be diagnosed and 

repaired by an authorized Westinghouse 

service center. 

SAFETY

ACTION LABEL

Summary of Contents for WGen5300sc
































Reviews: