3
WHL-032 REV. 6.2.16
FOREWORD
This manual is intended to be used in conjunction with other
literature provided with the boiler. This includes all related control
information. It is important that this manual, all other documents
included with this system, and additional publications including
the National Fuel Gas Code, ANSI Z223.1-2002, be reviewed in
their entirety before beginning any work.
Installation should be made in accordance with the regulations of
the Authority Having Jurisdiction, local code authorities, and utility
companies which pertain to this type of water heating equipment.
Authority Having Jurisdiction (AHJ)
–
The Authority Having
Jurisdiction may be a federal, state, local government, or
individual such as a fire chief, fire marshal, chief of a fire
prevention bureau, labor department or health department,
building official or electrical inspector, or
others having statutory
authority
. In some circumstances, the property owner or his/her
agent assumes the role, and at government installations, the
commanding officer or departmental official may be the AHJ.
NOTE:
Westinghouse reserves the right to modify product
technical specifications and components without prior notice.
FOR THE INSTALLER
This boiler must be installed by qualified and licensed personnel. The installer should be guided by the instructions furnished with the
boiler, and with local codes and utility company requirements. In the absence of local codes, preference should be given to the National
Fuel Gas Code, ANSI Z223.1-2002.
INSTALLATIONS MUST COMPLY WITH:
Authority Having Jurisdiction, local, state, provincial, and national codes, laws, regulations and ordinances.
The latest version of the National Fuel Gas Code, ANSI Z223.1, from American Gas Association Laboratories, 8501 East Pleasant
Valley Road, Cleveland, OH 44131.
In Canada
– CGA No. B149 (latest version), from Canadian Gas Association Laboratories, 55 Scarsdale Road, Don Mills, Ontario,
Canada M3B 2R3. Also, Canadian Electrical Code C 22.1, from Canadian Standards Association, 5060 Spectrum Way, Suite 100,
Mississauga, Ontario, Canada L4W 5N6.
Code for the installation of Heat Producing Appliances (latest version), from American Insurance Association, 85 John Street, New
York, NY 11038.
The latest version of the National Electrical Code, NFPA No. 70.
NOTE:
The gas manifold and controls met safe lighting and other performance criteria when the boiler underwent tests specified in
ANSI Z21.13
– latest edition.
The hydronic supply and return connections of these products are for installation in closed loop systems ONLY!
Use of this
product in any manner other than described in this manual may result in premature product failure, substantial property damage, severe
personal injury, or death. Damage or failure of this product (or the system in which it is installed) due to unauthorized use
IS NOT
COVERED BY WARRANTY
.
This manual must only be used by a qualified heating
installer/service technician. Read all instructions in this manual
before installing. Perform steps in the order given. Failure to
comply could result in substantial property damage, severe
personal injury, or death.
