whl-648 Rev. 001 Rel. 003 Date 10.8.19
17
Figure 5 - Components
Number
Component Description
Number
Component Description
Number Component Description
1
Air Vent
11
CH Return Adapter
21
Control Panel
2
Relief Valve Adapter
12
CH Pressure Gauge
22
Heat Exchanger
3
Air / Gas Mixing Pipe
13
DHW Outlet Adapter
23
Ignition Transformer
4
Gas Valve
14
Gas Inlet Adapter
24
Flame Detecting Sensor
5
Internal Storage Tank
15
DHW Inlet Adapter with Filter and
Flow Restrictor
25
BLDC Fan
6
Main PCB
16
Condensate Adapter
26
Air Pressure Switch
7
Manual ON/OFF Power Switch
17
Condensate Trap
27
Exhaust Vent Pipe
8
Internal Recirculation Pump (DHW) /
CH Internal Primary Pump
18
Condensate Air Pressure Switch
28
Exhaust Vent Adapter
9
CH Supply Adapter
19
Mixing Valve
29
Air Intake Adapter
10
CH Return Filter
20
Terminal Block
Table 12 - Component List
J. Wall-Mounting (Wall Mount Models Only)
The boiler may be installed on any suitable internal wall (suitable sound-proofing may be required when installing onto a stud partition wall).
The boiler must be installed on a wall that can bear its weight (more than 110 lbs. when fully plumbed and full of water). Installing the boiler
on a wall which cannot support its weight could result in property damage, personal injury, or death.
WARNING
!
Summary of Contents for WBRC 140 Series
