Always use a new hose-set when
connecting the appliance to the
water mains. An old hose-set must
not be reused. The inlet hose
should be inspected every 12
months for deterioration and
replaced if necessary.
This appliance has been fitted with
safety features which will prevent the
water used in the appliance from
returning back into the drinking water
system.
Water inlet hose with safety valve
After connecting the double-walled
water inlet hose, the safety valve is
next to the tap. Therefore the water
inlet hose is only under pressure
while the water is running. If the water
inlet hose starts to leak during this
operation, the safety valve cuts off the
running water.
Please take care when installing the
water inlet hose:
●
The electrical cable for the safety
valve is in the double-walled water
inlet hose. Do not immerse the
water inlet hose or the safety valve
in water.
●
If water inlet hose or the safety
valve is damaged, remove the
mains plug immediately.
●
A water inlet hose with safety valve
must only be replaced by a
specialist or by the Customer Care
Centre.
●
Place the water inlet hose in such
a way that it is never higher than
the bottom edge of the safety
valve.
Warning!
Dangerous voltage
installation 31
117994710 10042007.qxp 4/10/2007 3:04 PM Pagina 31